How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct procedure to add another key. It requires dealer service using a handheld computer dubbed Tech-2. Then it is necessary to purchase a new transponder. key need to be purchased.
Rotate your keys to stop one from wearing out quicker than another. This will keep your keys in perfect condition.
Replacement Case
The new key fobs are not like the older Saab keys. They have electronics which make it hard to duplicate. This has made stealing car keys much more difficult than twenty years ago. It also makes it more expensive to replace keys lost.
Saab 9-3 Key Fob Replacement 9-3 owners must have two keys working. If one of them is lost, it costs a fortune to add another to the car, as it requires replacing the CIM module and re-programming the locking cylinders. Dealers charge between $100 and $200 for this.
There are ways to cut down on these costs. Some parts suppliers will find the code from a spare key (usually the same one that opens the doors and turns off the ignition) and cut a new metal key blade at a fraction of the dealer's cost. The key must, however, be identical to the original one in order to function within your car.
You can also change the case yourself by following these steps. You will need a flathead screwdriver as well as some patience. With the screwdriver you can pull apart the plastic, and then take off the emergency key. Once the case is open, remove the electronics and put them in the new case. Put the correct key and badge inside the case.
Replacement Battery
The replacement battery for the Saab 9-3 is an inexpensive component that can be replaced quickly and easily. This YouTube tutorial for DIY Cyclone Cyd shows how to replace the battery in the remote key fob in just four steps. This tutorial can be used with any modern Saab key fob. However, the process could differ slightly.
This button is usually located just below the Saab logo on the back of the fob. It's usually near the Saab logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver through the small hole in this button. This will be enough to allow you to open the fob's case so that you can replace the battery.
Once the new CR1632 battery is installed then you can reassemble your remote key fob and program it to your car. The entire process should take no more than a half hour at the most. This is a simple process that doesn't require any special tools.
The process is more complicated if you lose your key, but it's possible. The dealer will need to verify the VIN of the car, and then order a replacement key blade and a TWICE module with the correct unique code. After that, they will need to cut the replacement key and then program it with a new software tool called MDI.
Key Replacement Fob
The key fob is equipped with a battery that is used to lock and unlock your vehicle. They have a limited life span and will eventually die. This is a problem that occurs with all cars. The good news is that you can replace the battery in most key fobs, without having to replace the entire case. Amazon sells replacement fobs with all the electronics installed. You can simply open the case and replace the batteries. You will need to remove the emergency key before you replace the batteries. To do this, you need to insert a small screwdriver that is flat into the slot in the middle of the. Move the screwdriver around the case until it will split open, making it simple to take it out.
If you're about to replace the keys ensure you have a spare, as this will reduce your total cost by a substantial amount. If you have an additional key, ask the dealer to cut it and program it to your vehicle. This is much less expensive than purchasing a brand new key fob.
If you don't have a spare, it is possible to add a second key to your car, but this requires a lot of research and effort. A second key can cost a few hundred dollars, and it requires programming of the car's computer. Professionals can do this however it's a costly option.
Replacement Ignition
Unlike earlier Saab automobiles, the new SAAB 9-3 models are equipped with an upgraded alarm system that is built on a key code. This means that when you lose your sole working key, adding another one can be very costly since the car needs to have a specific computer module installed, and it also must be specially designed to accept a different key. Even dealers can charge hundreds of dollars to program an additional key when they are not able to complete the task.
If you've lost your sole working key, a dealer will replace your car's computer (known as the CIM or SAAB TWICE) in order to make a replacement, and Saab 9-3 Key Fob Replacement will charge you the highest price for it. We can reprogram the current EEPROM of your car's computer so that it's ready for an extra key. This will save you more than 50% off the cost you would have to pay a dealer.
If you've been a long time owner of an 03-11 saab key programming 9-3, then you likely know that the ignition key isn't really all that durable. If your ignition key is not working correctly, you should look into replacing it. They can become very sticky and the buttons can fall off. The good news is that replacing the ignition key isn't as complicated as it seems and can be done quickly using the right tools.
สมาชิกทั้งหมด
1 คน 
สมาชิกที่กำลังออนไลน์
0 คน 
The Unknown Benefits Of Saab 9-3 Key Replacement
The new key fobs are not like the older Saab keys. They have electronics which make it hard to duplicate. This has made stealing car keys much more difficult than twenty years ago. It also makes it more expensive to replace keys lost.
If you've been a long time owner of an 03-11 
